Single and Dual Remote ByPass Oil Filtration Kits
AMSOIL Oil By-pass Filtration Benefits
• Dramatically Extended Drain Intervals
• Improved Oil Cooling
• Increased Filtration Capacity and Life
• Increased Fluid System Capacity
• Efficient Small Particle and Soot Removal
• Significantly Extended Engine Life
• Equipment Constantly Runs On Clean Oil
• Increased Engine Efficiency
• Remove Particles Less Than One Micron
Ford 7.3L PowerStroke Oil Bypass Unit
By-Pass Kit BMK26-EA
Recommended Filters (1) EaBP100 and (1) EaO26
Applications 6.9L, 7.3L and 7.5L International diesels
Spin-on adapter,12ft of hose,and filters included.
BMK26 Installation and Servicing Instructions
Recommended Filters (1) EaBP100 and (1) EaO26
Applications 6.9L, 7.3L and 7.5L International diesels
Spin-on adapter,12ft of hose,and filters included.
BMK26 Installation and Servicing Instructions
GM & Duramax 6.6L Oil Bypass Unit
By-Pass Kit BMK27-EA
Recommended Filters (1) EaBP100 and (1) EaO26
Applications Duramax/Isuzu 6.6L diesels
Spin-on adapter,12ft of hose,and filters included.
BMK27 Installation and Servicing Instructions
Recommended Filters (1) EaBP100 and (1) EaO26
Applications Duramax/Isuzu 6.6L diesels
Spin-on adapter,12ft of hose,and filters included.
BMK27 Installation and Servicing Instructions
Oil filtration is critical to engine life. Abrasive particles in dirty oil can quickly destroy critical components and ruin precision clearances in an engine if not removed through filtration.
Today's engines, however, are designed with smaller, lower-capacity oil filters which are harder to get to for servicing. This means less efficient filtration and a reluctance to change filters at regular intervals, leading to a build-up of dirt in the oil.
The AMSOIL Dual Remote Oil Filtration System is designed to provide superior filtration efficiency, increase oil capacity and improve oil filter accessibility.
Superior Filtration Efficiency
A vehicle's regular oil filter is a fullflow filter. This means that all the oil pumped by the engine must pass quickly through the filter before it reaches the engine. This high flow demand limits the size of particles conventional filters can effectively remove. Particle size is measured in units called microns. A decent full-flow filter will effectively remove particles down to about 25 microns. But studies have shown that over 60 percent of all engine wear is caused by particles in the 5 to 20 micron range. AMSOIL Ea By-Pass Oil Filters remove particles less than one micron, keeping the oil free of virtually all wear-causing particles. The dual remote system combines both full-flow and by-pass filtration on one convenient mount. With this system, all the oil is super-filtered, and more often.
Increased Oil Capacity
The trend to downsize engines over the past several years has significantly reduced oil sump capacities. By installing the dual remote system, oil sump capacity can be increased up to 50 percent. By adding more oil to the system, less strain is put on the oil and its additives. This dramatically increases the oil's service life.
Improved Accessibility
The dual remote mount is designed to make filter changes easy and convenient. It accomplishes this by using a remote filter mount that is easily installed in an accessible area of the engine compartment. The mount is connected to the engine block by two oil lines and a special spin-on oil filter adapter. The spin-on adapter replaces the engine's full-flow filter, using machined thread adapters that allow the dual remote system to fit about 98 percent of all car and light truck applications in the United States. Ports in the adapter provide both a source of oil and a place to return it to the engine.
Increased Filter Size
Many auto manufacturers have been using smaller full-flow filters to help squeeze their engines into tighter engine compartments. But reducing a filter's size severely limits its service life and contaminant-holding capacity. The dual remote mount moves the oil filter away from a tight-fitting area of the engine compartment into one where more room is available. In many installations, it is very likely that a much larger full-flow filter can be used. A larger full-flow filter allows for better oil flow, increases dirtholding capacity and provides longer service life than a smaller filter does.
Bypass oil filtration features a secondary filter with the purpose of eliminating nearly all contaminants from motor oil. Bypass filters have high capacities and eliminate much smaller particles than full-flow filters, including soot. Bypass filters reduce engine wear and increase oil volume, but their high efficiencies mean they also have higher restriction and must be used in conjunction with a full-flow filter.
Bypass filters operate by filtering oil on a "partial-flow" basis. They draw approximately 10 percent of the oil pump's capacity at any one time and trap the extremely small, wear-causing contaminants that full-flow filters can't remove. Bypass filters have a high pressure differential, causing the oil to flow through them very slowly and allowing for the removal of smaller contaminants. It is called bypass filtration because the oil flows from the bypass filter back to the sump, bypassing the engine. This continual process eventually makes all the oil analytically clean, reduces long-term wear and can dramatically extend oil drain intervals.
Bypass filters operate by filtering oil on a "partial-flow" basis. They draw approximately 10 percent of the oil pump's capacity at any one time and trap the extremely small, wear-causing contaminants that full-flow filters can't remove. Bypass filters have a high pressure differential, causing the oil to flow through them very slowly and allowing for the removal of smaller contaminants. It is called bypass filtration because the oil flows from the bypass filter back to the sump, bypassing the engine. This continual process eventually makes all the oil analytically clean, reduces long-term wear and can dramatically extend oil drain intervals.
How Bypass Filtration Works - VIDEO
"While the competition has been formulating their oils down to a price, we have been formulating ours up to the highest performance standards."
--Al Amatuzio--President and CEO, AMSOIL INC.
--Al Amatuzio--President and CEO, AMSOIL INC.
Benefits of Bypass Filtration:
• Efficient small-particle and soot removal
• Equipment constantly runs on clean oil
• Increased engine efficiency
• Can significantly extend engine life
• increased filtration capacity and life
• improved oil cooling
• Increased fluid system capacity
• Dramatically extended drain intervals
• Efficient small-particle and soot removal
• Equipment constantly runs on clean oil
• Increased engine efficiency
• Can significantly extend engine life
• increased filtration capacity and life
• improved oil cooling
• Increased fluid system capacity
• Dramatically extended drain intervals